prue
15+ posts.... a Uni wheeler!
Posts: 22
|
Post by prue on Feb 26, 2009 12:39:09 GMT
Hi, having nearly finished our van our last thing to do is the rooflining we bought the cloth off EBay and I wondered if anybody has done it before. The stuff that is on is halved up the middle with our two new vent screwed in. Ihope there are a few shortcuts and handy tips as I think its going to be a mamoth task. Cheers Prue.
|
|
|
Post by ant on Feb 27, 2009 8:19:24 GMT
Hi Prue. The roof lining comes in three panels, the centre panel with the vents in it. and a panel either side of it. The centre panel comes off by removeing the vent trims and the screws front, middle, and back. The side panels take a bit more to get off, they are GRP and are normally riveted on in the centre area, you then need to remove the pelmets above the windows and release the bottom edge of the panel. Not a 5 min job! Good Luck. Ant
|
|