|
|
Post by willywiloska on Feb 21, 2009 16:15:59 GMT
Hi Ant or anyone How do I remove the rear offside lights casing to change the reverse bulb. Can't see anyscrews on outside. Maybe it can done from inside  Can anyone help please, as I have to take it on Monday for MOT! Thanks Babs |
|
|
|
Post by willywiloska on Feb 21, 2009 16:19:44 GMT
Does anyone know how to remove nearside tail-light casing to change bulbs ??
|
|
|
|
Post by peterholden on Feb 21, 2009 18:39:52 GMT
On our Outlook there is a plastic filler strip that has to be prised out carefully and behind that is the securing bolt which has to come out. The light fitting has then to be pushed to one side to disengage the clip and let the fiiting come out
|
|
|
|
Post by aggsandrog on Feb 21, 2009 19:21:47 GMT
What is the conversion and base vehicle? I'd love to help.... Roger |
|
|
|
Post by willywiloska on Feb 22, 2009 19:09:01 GMT
Hi Roger,
it is 1989 C15 citroen. Rear light is on left as you enter door, where the cupboard is housed. there is no access to the lights only a smal 2" hole, which is impossible to put your hand in.
|
|
|
|
Post by ant on Feb 23, 2009 8:38:45 GMT
Hi Babs.
This may be a bit late for your MOT, I've been at the NEC for a week. The near side light is released by using a screwdriver through the hole in the undersink cupboard, you need to push a metal spring clip down that is on the top of the light cluster. The offside is easier to take the cooker off ( only 2 screws at the edge of the grill area) then you can see the top of the light behind the fridge and push the clip down to release it.
Ant
|
|
|
|
Post by willywiloska on Feb 23, 2009 21:23:30 GMT
Hi Ant
thanks for advice, will give it a try anyway.
Babs
|
|
