|
Post by marc4242 on May 18, 2009 15:23:30 GMT
I assume it's done by weight. We're still on our first canister, for those with Rascal / Hijet type vehicles with the canister about mmm 10-12" high, what weight is it when full/empty?
I don't want to run out mid Glastonbury ... ;D
|
|
|
Post by Graham on May 18, 2009 16:26:41 GMT
We always take a spare, so if one runs out then you've always got gas, then get a replacement when convenient. It always manages to run out when we are cooking a meal, then again it wouldn't run out when we weren't using it would it. Graham
|
|
roamingsue
50+ posts.... 3 wheels on my wagon!
Posts: 68
|
Post by roamingsue on May 18, 2009 20:27:56 GMT
I hope this post is appropriate, as perhaps you all know about this and this is telling you how to ' suck eggs' so to speak... apologies if it is..
For me, gas always runs out at an inconvenient moment so have solution with my trailer tent. I have a two way gasglow valve, both cylinders are connected. When one runs out all I do is switch to the other cylinder, seconds then I can change the empty cylinder at a convenient moment. You can get automatic ones but I thought they were dangerous as you might not pick up that the gas supply had switched to the other cylinder, manuel is fine for me.
|
|
|
Post by Derek on May 19, 2009 6:46:20 GMT
Tare weight is stamped on bottom rim of Gaz cylinders, a 907 is abt 3.2 kg I think with 2.72kg of gas when full.
|
|
|
Post by sloeman on Oct 2, 2009 19:14:11 GMT
If I need a rough estimate I disconnect mine and give it a slight shake. Keeping your ear close and feeling how the weight and sound sloshes around you can get a pretty good guesstimate on how full it is.
|
|