Tinted Rear Windows

[Derek]

We are wondering about having the rear side windows of the Berlingo tinted. Any advice (like don't DIY ), anyone had it done ? It seems quite popular on Bongos and VWs.

Derek

[karenw]

Jun 30, 2009 19:47:23 GMT Derek said:

We are wondering about having the rear side windows of the Berlingo tinted. Derek

If you're not sure, how about using tinted heat-reflective film instead. This will tint the windows and keep the van cooler in summer and warmer in winter and, if you change your mind, you can remove it. We use slightly-tinted, heat-reflective film on our home windows - and it's quite effective.

[Derek]

Thanks for that Karen, I will check it out, actually you have given me an idea. Halfords have film at about £19 a roll, we could try that to see if we like it before we lash out £160 on a professional job.

[karenw]

You could try this company if you'd like thermal films (they are good in heat!): www.primrosewindowfilms.co.uk/

[yamaha]

Derek - when we bought our Bongo, I requested they darken the windows - seems a local ( Poole ) company does them.

I did read somewhere that the adhesive film needs to be well wetted with soapy water before going anywhere near the windows - then squeegy on the film whilst still wet - this, apparently, gives you time to eliminate any bubbles and reposition it if necessary.

Best of luck !!

Mike

[Derek]

Hi Both,

I think that like one of Clint Eastwoods characters said, "A man has to know his limitations" applies here. I can't even get a bit of gaffer tape to go down without wrinkles . If I put some on it would only be to try it out. I have spoken to a guy recommended by my local Citroen agency and he says I need 20% shading (I said I wanted to see when reversing) and that it was a wast of time not doing the rear screen. No way am I going near the heated windscreen element so it looks like trying it first is not a runner anyway.

I am still undecided but what I need to be sure of is the most suitable light attenuation, I guess I am going to have to rely on professional advice.

Thanks both for the info

Derek

[karenw]

Don't worry - it really is VERY easy! Just soap up the window (using dilute soapy water - ideally washing-up liquid), slap on the film, slide it around until it's aligned with the window frame, squeeze out any air-bubbles with a squee-gee then trim the edges to tidy it up. If/when you want to remove it, use a hair-dryer. I'd estimate about 10-20 minutes to fit to each window, at most!