|
Post by lunnie on Jul 14, 2009 8:43:34 GMT
Hi Ant, I think I have asked this question before, if I have I apologize.
How do you treat the small crazing ie filling in, or removing the offending little cracks!
Hope you and yours are ok, long time no see.
Joan
|
|
|
Post by ant on Jul 15, 2009 9:52:43 GMT
Hi Joan. If the cracks are very small I'd leave them alone, the trouble with repairing cracks is they need to be ground out in order to get the filler or gel coat to stay in the crack this often makes a relatively small crack into a fairly major repair. If the crack is a surface crack and not too deep you can sometime sand them out with some fine 1200 wet n dry then polish the grp back. If they don't leak and aren't getting any worse I'd leave them. Ant
|
|
|
Post by lunnie on Jul 15, 2009 12:55:24 GMT
Many thanks for that info - Joan
|
|