|
|
Post by scarrabri1 on Sept 3, 2009 21:39:05 GMT
Hi i have just bought a 40l aquaroll off ebay,i was wondering if i can still use my inline shureflow pump as the guy i bought the aquaroll off used one that was in the water ,i am hoping i can use the the onboard water container and the outside aquaroll by adding a diverter with a on off valve, so i can draw water for the shower from the aquaroll which is easyer to fill,and use the onboard container for drinking and washing up ,the aquaroll i have bought looks like it has to remain on its side,so i am not sure how i connect to it with my shureflow pump,any one any idea best wishes Brian  |
|
caz
50+ posts.... 3 wheels on my wagon!
Posts: 58
|
Post by caz on Sept 9, 2009 16:17:00 GMT
I don't know how you could connect it to your pump, but could you connect it so that it filled the on board tank and then the onboard pump could supply the shower and taps? I'm sure I've heard of motorhomers (and some caravanners who have on board tanks) doing this. When using an aquaroll with a caravan, the system is a submersible pump in the roll with a 12v wire in a plastic sheath attached to the hose and it plugs into the side of the caravan to connect with the caravan's 12 supply and internal water system - like this: www.caravanaccessoryshop.co.uk/images/uploads/thumbs/thumb_1007.jpgI see no reason why you couldn't buy a separate pump like this - www.caravanaccessoryshop.co.uk/index.php?_a=viewProd&productId=863and connect it to your 12v supply and a hose to the inlet for the onboard tank. |
|
|
|
Post by scarrabri1 on Sept 9, 2009 17:51:06 GMT
Hi Caz thanks for help , i am always open to ideas, and will have a look at what you say to see if i can incorporate it in to my system, i have a small water storage tank inside ,but was not sure if you can connect it all up to a outside aquaroll,any way very best wishes Brian
|
|
